News Center

CNC lathes are now used in the workshop more and more widely, and this type of CNC lathe as a special equipment, it is always unavoidable that some failures occasionally occur during the use process, so we must pay attention to maintenance and Maintain. So what skills are worth learning during the repair process? Today we will work with you to learn about the skills of repairing full-function CNC lathes.

Maintenance principle
1. The maintenance process of a full-function CNC lathe is not particularly complicated, especially in the maintenance process, you should first deal with relatively simple problems, and then repair some more complex problems, this is a process from simple to difficult.

2. The maintenance of CNC machine tools should first repair the machinery and then repair the electrical appliances. This is a principle that must be followed. The maintenance of hydraulic and pneumatic electrical appliances must be the first priority.

3. Repair the exterior first, and then start the repair from the interior. In the process of this sentence, we must fully understand some of the operational problems and specific conditions of the CNC lathe in the use process, and the specific conditions include the faults generated during the use process. If the fault is caused by improper operation, we must first resolve these errors. Of course, we must further understand whether the same equipment has experienced the same fault, or see whether the workshop has experienced similar faults.

Fault analysis
1. To repair the CNC lathe, in addition to observing some of the above-mentioned faults, it is necessary to conduct a comprehensive analysis and research on the machine to check whether it is a mechanical fault or an electrical fault. Of course, it may also be a hydraulic problem, and it may still be started. The problem.

2. When repairing CNC lathes, it is necessary to carry out simplified treatment, which means that all the problems cannot be made too complicated, because some CNC lathes produced now basically adopt this kind of light-sensitive electrical response. In the magnetic induction method, it is possible that a little bit of water droplets will cause the machine tool to malfunction or cause the machine tool to automatically alarm.

3. Certain details must be considered when repairing a full-function CNC lathe. This is because a series of vibrations will occur during the entire operation of the machine tool. Such vibrations will loosen the screws of the machine or other electrical appliances. For example, the loosening of the thread or the loosening of the connector may also cause some slippage. In this situation, an automatic alarm will also appear. Of course, it may also be caused by the voltage being too low or the motor overheating. Automatic alarm.

Therefore, in view of the various conditions above, the full-function CNC lathe must be carefully inspected to repair it. After all, the handling of some external cavities is relatively simple.